The SV-R machines are designed for tapping bends into an operating pipeline, which is under pressure of the transported medium up to 6.3 MPa, while maintaining tightness when tapping.
They are used in the field and at industrial facilities for the transportation of gas, oil, water, steam, etc.
Does not require pipeline shutdown.
The machines received a permit for use at hazardous production facilities issued by the Federal Service of the Russian Federation for Environmental, Technological and Nuclear Supervision.
Supplied for installation on a full port or ball valve according to the DN and PN range of the machine.
Pipe wall thickness from 4 to 20 mm.
The cut pipe element is retained after the hole is cut and removed when the machine is removed.
The manual drive does not require an energy source.